How to adjust the bending dimension of bending machine?

How to adjust the bending dimension of bending machine?

Today, I will tell you that the bending machine is a kind of equipment that can bend the thin plate. During operation, the transmission line will plug in the magnetic coil, which will attract the pressing plate after plugging in, so as to realize the clamping of the pressing plate and the thin plate in the middle of the base. Because the magnetic field force clamping is selected, the pressing plate can be made into a variety of steel parts, and the steel parts with external walls can be produced and processed, and the actual operation is very simple.

Bending machine adjustment dimension

In fact, adjusting the bending size is to adjust the size of the diaphragm, according to the button issued by the right of the bending machine to carry out rough and fine adjustment. Adjust the angle of view of bending, i.e. adjust the depth of the wound cut as V-groove, adjust according to the runner on the right side of the angle of view, and select the depth s ≤ 100.

The size adjustment of the bending machine is 650xs? XL, which is a national industry standard, and then in addition to V, other conditions can be found out about the relevant national industry standards.

Operation instructions of bending machine:

1. First of all, the bending force and the opening size of the V-shaped groove of the upper die should be determined according to the thickness of the plate and the length of the folded plate.

2. Point to the upper and lower grinding tool core and adjust the clearance.

3. Define the front and rear left and right material retaining parts and process steps, and implement the conversion according to the adjustment of power switch.

4. Place the steel parts in the middle of the cabinet of the hydraulic bending machine to measure the pressure.

5. Adjust the gap of grinding tool again, and adjust the whole lower die if necessary.

6. In addition, the hydraulic seals shall be completely sealed, and those with leakage shall be removed and replaced immediately.