Relationship between common bending machine and numerical control bending machine

In the understanding, the main purpose of the use of bending machine is to bend the metal, regardless of the processing process, there are always these parameters: bending depth, bending angle, etc. If we need to ensure that these parameters meet the requirements, we need more precise control. CNC bending machine has this advantage. The relationship between common bending machine and CNC bending machine is described below.

In short, CNC bending machine is just to add CNC device or CNC system on the basis of common bending machine. Of course, it can also be understood that after the removal of the CNC system, it can also be used as a common bending machine. The difference between them is CNC system. This is the key to affect the performance of both.

The advantage of CNC bending machine compared with common bending machine is

1. Bending angle and depth: the CNC system can automatically calculate the depth according to the added parameters and conditions, and ensure the same angle more efficiently.

2. It can provide high stability and flexibility, and can compensate according to the actual cleaning in the working process of the bending machine to effectively guarantee the bending results.

3. It can realize error alarm based on CNC system.

If we remove the CNC system from the practical use of the bending machine will be smaller, and for the CNC bending machine in the state of maintenance, considering the removal of the CNC system to achieve the common bending machine is not too high value.

CNC bending machine has disadvantages for common bending machine because it depends on the stability and operability of CNC system. In addition, the overall operating environment is relatively high.

The relationship between common bending machine and numerical control bending machine can be transformed to a certain extent, but in fact, they have their own practical value.