What are the precautions for the lubrication of bending machine?

Bending machine must be maintained, CNC lathes are naturally like this. As the equipment of production and manufacturing equipment, CNC lathe plays a key role in laser cutting of metal materials. Only when the CNC lathe is well maintained can it give full play to the greater economic benefits in manufacturing. For the maintenance of CNC lathe, CNC lathe lubrication is indispensable. Lubricating grease can not only reduce the friction of mechanical equipment, but also reduce the temperature of refrigeration, seal leakage, avoid rust, shock buffer and clean-up, and improve the service life of CNC lathe. Many benefits show the great effect of lubrication maintenance.

There are many ways to moisten the CNC lathe of bending machine. The common ways are to moisten the oil by hand, to moisten the oil by oil leakage, to moisten the oil rope, to moisten the oil pad, to moisten the natural air absorption, to moisten the suction filtration, to moisten the oil bath, to moisten the oil ring, to moisten the splashing, to moisten the scraper, to moisten the roller, to moisten the spray moisten the manual pump, to moisten the working pressure circulation system, and to implement it automatically and regularly Quantitative analysis of moistening and welding fume moistening.

The choice of the embellishment method of the CNC lathe of the bending machine should be based on the construction of the CNC lathe, the level of automation technology, the load of the application of the CNC lathe and the comprehensive consideration of the accuracy. In addition, the embellishment method of the CNC lathe should be considered to reduce the wear, energy and consumption, and also to prevent the temperature and vibration. The key parts in the CNC lathe are typical mechanical parts, which are standardized, practical and universal. For example, rolling bearing, roller bearing, transmission gear, worm gear pair, turning and dragging slide rail, screw transmission system pair (ball screw nut pair), clutch, hydraulic transmission system, camshaft, etc., the lubrication conditions are different.

Natural environment standard for application of CNC lathe of bending machine: CNC lathe is generally installed in indoor air for application, the maximum working temperature in summer is 40 ℃, and heating mode is often used when the average temperature in winter is less than 0 ℃, so that the working temperature is higher than 5-10 ℃. The high-precision CNC lathe specifies the natural environment of constant temperature air conditioning, generally around 20 ℃. However, due to the high precision and automation technology of many CNC lathes, the viscosity, oxidation resistance (service life) and oil cleanliness of lubricating grease are strictly regulated.

Load standard of CNC lathe for bending machine: different kinds of CNC lathes with different specifications, models and specifications, even in the same CNC lathe, because of the different processing conditions of parts, the load standard is quite different. The regulations on Runhua are quite different. For example, the spindle bearing of the sand wheel of the high-speed internal and external grinding machine is quite different from the light load and low-speed spindle bearing of the Super Heavy CNC lathe in terms of the lubrication method and lubricating fluid. The former one must be moistened with welding fume or oil / gas intake system, and the latter one needs to be moistened with edible oil bath or working pressure circulation system, and the product oil with lower viscosity shall be used.