Product description
1. The rack is made of all steel welded structure with sufficient strength and rigidity, and the internal stress is eliminated by normalizing and high-frequency vibration to ensure the overall accuracy of the fuselage.
2, adopt the German large floor boring and milling machine, using one processing method to make precision machining to ensure machining accuracy.
3, hydraulic pendulum structure, upper tool rest return device, nitrogen cylinder return, fast speed.
4, the hydraulic system adopts integral logic circuit, controlled by sequence valve, stable action, low noise and simple maintenance.
5, the use of domestic hydraulic valve control tool carrier operation.
6, the material compression device adopts the integral circuit and the independent parallel cylinder. When the sheet material is not normal, it can be freely expanded and pressed, and the pressing force can also be adjusted with the material and thickness of the sheet without damaging the board.
7, the eccentric wheel mechanism is adopted to manually adjust the blade gap by using the dial wheel, and the operation is simple, so as to meet the shearing requirements of different plate thickness and material.
8, through time relay control, can achieve the fixed range shearing.
9, the number of shearing is controlled by the counter.
10, the light line shadow alignment device is convenient for scribing and shearing.
11. The electric rear stopper is equipped with manual fine adjustment and numerical display function.
12, electrical control is concentrated and reliable, as follows: the power facilities are located in the fuselage and operated and controlled by the buttons on the control panel. It is equipped with foot switch and can operate directly through shearing action. It is convenient and quick. The main electrical components of Shanghai are CHINT products. The circuit breaker is used to protect the short circuit of the control circuit. The overload and short circuit of the motor are protected by the air switch.
13. The hydraulic system is safe and reliable. The hydraulic manifold block is equipped with a direct acting safety relief valve to ensure accurate pressure adjustment. In order to protect the safety of the oil pump, the pipe type one-way valve is specially installed at the pump head to avoid the impact of oil pressure on the pump body.
14. The upper and lower knives are made of high quality materials and all are heat-treated so as to ensure that they have sufficient hardness and long service life. This machine adopts the steel plate welded structure hydraulic transmission rack, has enough strength and steel hardness, the mobile rear stopper is equipped with the numerical display structure with manual fine adjustment display, the knife gap quick adjustment mechanism and the light alignment device, in order to facilitate the scribing and shearing, counting, sizing device and sensitive reliable safety device, can be equipped with the synchronous material unloading trolley.
Technical parameter
Model | Scissors thickness | Sheared width | Shear angle | Material strength | Adjusting range of rear stopper | Number of trips | Main motor power | Outline size |
|
4*2500 | Four | Two thousand and five hundred | 1 degrees 30 | Less than 450 | 20~500 | Fourteen | Five point five | 3040*1550*1550 |
4*3200 | Four | Three thousand and two hundred | 1 degrees 30 | Less than 450 | 20~500 | Twelve | Five point five | 3840*1550*1550 |
4*4000 | Four | Four thousand | 1 degrees 30 | Less than 450 | 20~600 | Ten | Five point five | 4600*1700*1700 |
4*6000 | Four | Six thousand | 1 degrees 30 | Less than 450 | 20~800 | Five | Seven point five | 6460*2100*2200 |
6*2500 | Six | Two thousand and five hundred | 1 degrees 30 | Less than 450 | 20~500 | Fourteen | Seven point five | 3040*1710*1620 |
6*3200 | Six | Three thousand and two hundred | 1 degrees 30 | Less than 450 | 20~500 | Twelve | Seven point five | 3840*1710*1620 |
6*4000 | Six | Four thousand | 1 degrees 30 | Less than 450 | 20~600 | Nine | Seven point five | 4620*1850*1700 |
6*5000 | Six | Five thousand | 1 degrees 30 | Less than 450 | 20~600 | Eight | Seven point five | 3140*1710*1620 |
6*6000 | Six | Six thousand | 1 degrees 30 | Less than 450 | 20~800 | Five | Eleven | 6480*2100*2300 |
8*2500 | Eight | Two thousand and five hundred | 1 degrees 30 | Less than 450 | 20~500 | Eleven | Seven point five | 3040*1700*1700 |
8*3200 | Eight | Three thousand and two hundred | 1 degrees 30 | Less than 450 | 20~500 | Eight | Seven point five | 3860*1700*1700 |
8*4000 | Eight | Four thousand | 1 degrees 30 | Less than 450 | 20~600 | Eight | Seven point five | 4640*1700*1700 |
8*5000 | Eight | Five thousand | 1 degrees 30 | Less than 450 | 20~600 | Eight | Seven point five | 5400*2400*2000 |
8*6000 | Eight | Six thousand | 1 degrees 30 | Less than 450 | 20~800 | Eight | Eleven | 6480*2100*2350 |
10*2500 | Ten | Two thousand and five hundred | 1 degrees 30 | Less than 450 | 20~500 | Ten | Eleven | 3040*1800*1700 |
10*3200 | Ten | Three thousand and two hundred | 1 degrees 30 | Less than 450 | 20~500 | Ten | Eleven | 3860*2000*1700 |
10*4000 | Ten | Four thousand | 1 degrees 30 | Less than 450 | 20~600 | Ten | Eleven | 4650*2100*2000 |
10*6000 | Ten | Six thousand | 1 degrees 30 | Less than 450 | 20~800 | Ten | Fifteen | 6500*2100*2300 |
12*2500 | Twelve | Two thousand and five hundred | 2 degrees | Less than 450 | 20~600 | Twelve | Eighteen point five | 3140*2050*2000 |
12*3200 | Twelve | Three thousand and two hundred | 2 degrees | Less than 450 | 20~600 | Ten | Eighteen point five | 3880*2150*2000 |
12*4000 | Twelve | Four thousand | 2 degrees | Less than 450 | 20~600 | Ten | Eighteen point five | 4680*2150*2100 |
12*5000 | Twelve | Five thousand | 2 degrees | Less than 450 | 20~600 | Six | Eighteen point five | 3240*1900*1900 |
12*6000 | Twelve | Six thousand | 2 degrees | Less than 450 | 20~1000 | Five | Eighteen point five | 6900*2600*2700 |
16*2500 | Sixteen | Two thousand and five hundred | 2 degrees 30 | Less than 450 | 20~600 | Ten | Eighteen point five | 3140*2150*2000 |
16*3200 | Sixteen | Three thousand and two hundred | 2 degrees 30 | Less than 450 | 20~600 | Ten | Eighteen point five | 3880*2150*2000 |
16*4000 | Sixteen | Four thousand | 2 degrees 30 | Less than 450 | 20~800 | Ten | Eighteen point five | 4650*2150*2200 |
16*5000 | Sixteen | Five thousand | 2 degrees | Less than 450 | 20~1000 | Six | Eighteen point five | 5900*2600*2700 |
16*6000 | Sixteen | Six thousand | 2 degrees | Less than 450 | 20~1000 | Five | Twenty-two | 6900*2700*2700 |
20*2500 | Twenty | Two thousand and five hundred | 3 degrees | Less than 450 | 20~800 | Eight | Twenty-two | 3440*2300*2500 |
20*3200 | Twenty | Three thousand and two hundred | 3 degrees | Less than 450 | 20~800 | Eight | Twenty-two | 4150*2350*2700 |
20*4000 | Twenty | Four thousand | 3 degrees | Less than 450 | 20~1000 | Five | Twenty-two | 4850*2600*2400 |
20*6000 | Twenty | Six thousand | 3 degrees | Less than 450 | 20~1000 | Four | Twenty-two | 6700*3000*3000 |
25*2500 | Twenty-five | Two thousand and five hundred | 3 degrees | Less than 450 | 20~1000 | Eight | Thirty-seven | 3200*2700*2900 |
25*3200 | Twenty-five | Three thousand and two hundred | 3 degrees | Less than 450 | 20~1000 | Five | Thirty-seven | 4200*2400*2500 |
30*2500 | Thirty | Two thousand and five hundred | 3 degrees | Less than 450 | 20~1000 | Four | Thirty-seven | 3300*2900*3000 |
30*3200 | Thirty | Three thousand and two hundred | 3 degrees 30 | Less than 450 | 20~1000 | Four | Forty | 4200*2500*2600 |
40*2500 | Forty | Two thousand and five hundred | 4 degrees | Less than 450 | 20~1000 | Three | Seventy-five | 3200*3300*3200 |
40*3200 | Forty | Three thousand and two hundred | 4 degrees | Less than 450 | 20~1000 | Three | Ninety | 4300*3300*3000
|