Product description
The main structure and points of the machine are:
1. The frame is made of steel structure, the left and right vertical plates, the worktable and the pressing plate are welded into a whole structure. After welding, the internal stress is eliminated by tempering, so the whole steel is good and the stability is high.
2, the fuselage, slider and other important components are analyzed by ANSYS finite element analysis software to ensure the reliability of machine tools.
3, hydraulic transmission, stable and reliable.
4, machine block, torsion shaft synchronization, high accuracy.
5, the rear block distance and the slider stroke are all controlled by the numerical control system, which is convenient and quick (optional CNC system).
6, the oil cylinder is forged, Quenched and tempered, finely ground, hard chrome plated and other processes, and imported seal ring to overcome the oil leakage phenomenon.
7, the hydraulic system adopts an oil integrated hydraulic system, which reduces the installation of pipelines and has a beautiful appearance.
8, hydraulic components choose good products to ensure the reliability and safety of machine operation.
9, the machine uses three phase system power supply (380V) power supply, the control circuit voltage (220V) is provided by the control transformer, and the executive circuit solenoid valve DC power supply (+24V) is supplied by transformer and silicon rectifier.
Technical parameter
Basic parameters and configuration of machine |
Serial number | Name | numerical value | Company | Remarks |
One | Nominal pressure | Four hundred | KN |
|
Two | Bending Length | One thousand and five hundred | Mm |
|
Three | Column spacing | One thousand and three hundred | Mm |
|
Four | Maximum opening height | Two hundred and ten | Mm |
|
Five | throat depth | Two hundred | Mm |
|
Six | Worktable height | Eight hundred and fifty | Mm |
|
Seven | Speed of slider movement | No load | 60 adjustable | Mm /s |
|
Eight | work | Twelve | Mm /s |
|
Nine | Return trip | Seventy-five | Mm /s |
|
Ten | Main motor | Model | Y225M-6 |
|
|
power | Three | KW |
|
speed | One thousand four hundred and forty | R/min |
|
Eleven | Rear stop motor | Model | Y802-6 |
|
|
power | Zero point five five | KW |
|
speed | Nine hundred and sixty | R/min |
|
Twelve | Axial piston pump | Model | 25MCY14-IB |
|
|
flow | Ten | Ml/r |
|
pressure | Thirty-one point five | Mpa |
|
Thirteen | Hydraulic system | Maximum working pressure | Twenty-two | Mpa |
|
Fourteen | Outline size | long | One thousand and six hundred | Mm |
|
wide | Eight hundred | Mm |
|
high | One thousand seven hundred and eighty | Mm |
|